Presentation
<< RETOUR
Cold room and industrial panel
Description
Because every project is unique, your project will benefit from a customised design, contact us to request a personalised study and quote.
We will get back to you in 24/48h.
Your contact at ODIC:
Ms Rina Jeunehomme
+33 (0)3 85 73 90 13 – r.jeunehomme@odic-sa.com
Due to its many benefits, the MODULAR room represents a new generation of cold rooms.
- A fully interchangeable panel
- Much easier to assemble
- Easy to extend in 3 dimensions
- Easy storage and transport
- MODULE:
400mm, 800mm, 1000mm and 1200mm - THICKNESS:
60mm, 80mm and 100 mm - HEIGHT:
Maximum internal height 3200mm / Maximum span
3200mm - JOINING SYSTEM:
Eccentric joining hook / tightening by hex wrench - COATING:
Slightly ribbed galvanised steel sheet with
peel-off protective film.
Glossy white. For food products / 25μ polyester primer included. In accordance with standard EN 10169.
ON ORDER: Smooth finish aspect. - INSULATION:
CFC-free, HCFC-free hard polyurethane foam.
Density: 40 kg/m³ (+3 – 0 kg/m³)
“U” value:
PANEL 60 = 0.38 W/m² ºC
PANEL 80 = 0.28 W/m² ºC
PANEL 100 = 0.23 W/m² ºC - FLOORING:
Pedestrian flooring – S8
– For pedestrian traffic only.
– Interior finish in non-slip plastic-coated sheet metal
1mm thick.
– For food products.
Reinforced flooring – M9
– Reinforced floor, suitable for pedestrian traffic and
manual trolleys.
– Reinforced interior finish with birch plywood
and non-slip phenolic resin.
Overlay reinforced flooring
– Aluminium anti-slip 2/4 (DAMIER)
– Galvanised steel anti-slip 3/5 (STRIATED) - INSULATED DOOR:
Panel-mounted rotating sliding door. - ACCESSORIES INCLUDED:
Interior vertical, ceiling and floor FILLETS in all models.
COUNTERBALANCE VALVE in freezing (rooms with 100mm panels)
“U” FLOOR PROFILE in rooms WITHOUT FLOOR.
Prefabricated SANDWICH-type insulating panels,
made up of:
- INSULATION: CFC-free, HCFC-free hard polyurethane foam. Density 40 kg/m³
(tolerance + 3 – 0 kg/m³)
Average THERMAL TRANSMISSION COEFFICIENT “U”:
– PANEL 60 = 0.38 W/m² ºC
– PANEL 100 = 0.23 W/m² ºC
– PANEL 150 = 0.15 W/m² ºC - REACTION TO FIRE:
– Bs2d0 panel (in accordance with NF-EN 13501-1)
– Working gap: Between -40º C and +75º C depending on thickness. - COATING:
Standard:
Slightly ribbed galvanised steel sheet and polyester primer (25μ) with peel-off protective film. White.
For food products.
100 – TARIFF 2023
odic-sa.com
On request:
Pre-painted plastisol (100μ) sheet steel
AISI 304 SCOTCH stainless sheet steel.
PVC-coated sheet steel (120μ) for foodstuffs
Other sheet steel thicknesses available. - ASSEMBLY SYSTEM: male-female joining,
with eccentric joining hook / tightening by hex wrench
(optional), and seal with:
– AIRTIGHTNESS: “O” under 50 Pa (EN-12114)
– WATERTIGHTNESS: “A” under 1,200 Pa (EN-12865) - SIZING:
Length: Maximum length of 12m.
Width: 1.180mm useable. Total width: 1.195mm.
Thickness: 60, 75, 100, 120, 150, 180, 200mm.
Tolerances: In accordance with standard EN 14509.
