COLD DEMOUNTABLE GRID CABINET
Fully modular to adapt to 100% of your needs
THE ADVANTAGES OF THE ODIC COLD DEMOUNTABLE GRID CABINET
Magnetic seal
can be removed without tools
Control
electronic
Interior angles
curved
Adjustable feet
height 150mm
Reversible door
with swing-door return and dead stop
Handle
non-protruding
Locking
with key
A TECHNICAL LOOK AT THE COLD DEMOUNTABLE GRID CABINET
Ease of use
- Electronically regulated
- Automatic defrost control via temperature probe
- On/off with power indicator light
- Digital temperature display
- Defrosting indicator
Health and safety
- Non-protruding handle
- Curved interior angles
- Reversible door or half-door with return swing and 105° dead stop – pivot-mounted
- Magnetic seal removable without tools
- Key lock
- Ventilation stops when doors are open
- Automatic defrosting
- Evaporation of defrost water via a thermo-regulated heating element in a tray at the back of the appliance
- Programmable visual and audible high/low temperature alarm
Productivity performance
- R452A, R134a and R290 fluids
- Ventilated evaporator
- With or without cooling unit
- Refrigeration equipment housed at the top of the appliance
- Treated battery coil on positive models
- Air-cooled condenser with protective grille
- Voltage single-phase 230V + T – 50Hz
- Requires 20A socket for hot food holding equipment
Materials and equipment
- Monocoque or demountable build
- Stainless steel
- Stainless steel floor
- Insulation 70mm
- Panels injected with CFC-free polyurethane foam at 42 kg/m³
- Heat-flow density 17W/m² for a temperature of +1°C inside and +43°C outside
- Insulation K-value: 0.32 W/m²
- PVC profile to eliminate thermal bridges
- Air-cooled condenser with protective grille
- Evaporation of defrost water via a thermo-regulated heating element or hot gas
- Insulation 90mm (600×800 model)
- Panels injected with CFC-free polyurethane foam at 42 kg/m³
- Heat-flow density 17W/m² for a temperature of +1°C inside and +43°C outside
- Insulation K-value: 0.32 W/m²
- PVC profile to eliminate thermal bridges
- Interior lighting only on positive and hot models
- Adjustable feet, height 150mm
- Stainless steel heating element and external turbine for hot model
Fittings
- Interior racks with 35mm pitch can be removed without tools
- Stainless steel runners
- 3 stainless steel grids per door in GN1/1, GN2/1 and 400×600 models
- 4 stainless steel grids per door for 600×800 model
Options
- Key lock on glass door and glass half-door
- USB socket with key