• Electronic control built into the door at eye level
• Ergonomic handle for right- and left-handed use
• Side grip for easy door opening
• Hinged, removable condensing unit cover
• Suspended evaporator with easy, tool-free access (pivoting fan support plate)
• Water collection tray
• Trolley guide STANDARD CONTROL:
• Automatic temperature and time management
• Digital temperature display
• Defrost control lights
• 2 operating modes: By time / By insertion probe
• Switches to “preservation mode” at the end of the cycle

• Automatic swing-door return
• Interior lock release
• Key lock
• Visual and audible alarm at the end of the cycle
• Switches to “time” mode if probe defect
• Safety contact: ventilation stops when door is open
• NF 60335 chapter 2-89
• HACCP
• EMC directive
• NF 378
• EN17032
• IP65 protection on the front panel
• IP44 protection on fans

• Curved interior angles
• Seal can be removed without tools
• Door sweep
• Cooling cell defrosting: automatic at the start of the cycle, with the option to interrupt or manually override
• Combined cell defrosting: automatic by electric resistance at the start of the cycle, with the option to interrupt or manually override

• Hinges on the left
• PREMIUM control with USB connectivity
• Insulated flooring for cooling cell
• 3-point probe
• Electronic expansion valve for optimised cooling time

• Eco-design
• ISO 9001-Reduced floor footprint
• Silent “owl wing” fan blades with ferrules to optimise airflow and reduce noise
• Electronically controlled fan: ERP 2018
• Corrosion-resistant evaporator with horizontal fins for more even cooling
• Heating cable built into the front panel profile can be removed without tools (for easy replacement) on combi cells
• Ambient operation up to +43°C
• Operation in “SOFT” or “HARD” mode
• Voltage with condensing unit 3-phase 380V+T+N
• Voltage without condensing unit single-phase 230V

• 304 stainless steel on all sides (including back, top and bottom)
• Equipment delivered 1-assembled with condensing unit on top or unit next to it ready for connection / 2-pre-assembled (assembled but not fixed) / 3-disassembled (see technical data sheets)
• A pump down solenoid valve, dryer, expansion valve and liquid sight glass are supplied for a separate unit not fitted to the cell. The condensing unit is not charged with gas, but the evaporator and the unit are pressurised with nitrogen.
• Stainless steel flooring as standard for cooling cell
• Insulated stainless steel flooring as standard for combined cell (18 mm high-density PE sheet)
• Insulation thickness 70mm
• Panels injected with CFC-free polyurethane foam at 42kg/m³ – hinges on the right as standard
• 3 reinforced aluminium alloy hinges with 3-axis adjustment and captive covers
• Direct drainage of condensation water or by coupling two drainage points on the appliance (back and side)
• Fluid R452A or subcritical CO2 (without expansion valve) Other fluids: contact us
• Air-cooled or water-cooled condensing unit
• Version without condensing unit: supply of evaporator, control system and expansion valve

Electronic control built into the door at eye level
Programmable large 4.3” touch screen control
10 recordable programmes
4 basic menus pre-recorded:

• Standard refrigeration
• Refrigeration for delicate products
• Standard freezing
• Freezing for delicate products

Automatic temperature and time management
Digital temperature display
Defrost control lights
3 operating modes:
By time / By insertion probe / By recipe programmes
Switches to “preservation mode” at the end of the cycle
“HARD” operating mode available
Visual and audible alarm at the end of the cycle
Condenser ventilation management available (HP float valve)

Preservation mode:
The user can start the “preservation mode” independently of a preliminary refrigeration cycle

Traceability: Data storage via USB key and/or RS485 modbus and Ethernet connectivity